How to Fit a Bike in a Sedan?

Whenever the topic of transporting a bike comes up, the first thing that will pop up in people’s minds is to rely on shipping service. However, the services that these shipping companies offer are not cheap. You might be looking to pay hundreds just to move your bicycle a couple of blocks.

Now, did you know that you could ship your bike with your car? Yes! You can do that by learning how to fit a bike in a Sedan! All you need to do is pay the gas price for the trip. Nothing extra! And if you stick with us till the end of this guide, you can get to know every detail about the process as we will spill it all out here!

How to Make Your Bike Fit in Your Sedan?

So, the bike cycle will not go in your sedan if you do not work on it a little bit. And the good news is that you do not have to do anything intricate to make the bike fit inside. Can you not believe that? Take a look at these steps:

Step 1: Clean the Bicycle Properly

The last thing you want is dirt all over the car’s interior. For that reason, before moving any further, you should give the cycle a good clean. Wet wipes will be your best friend in this case. Use those to get any of the dust and debris on the frame.

For the tires, you can rinse them off with warm water. Use a brush if you are dealing with stubborn mud dried in the tires’ grooves.

Step 2: Take the Front Wheel Off

Now that the bike is squeaky clean, you should get the front wheels off. Use the bike dismantling tools for this. After getting the wheel off, store it inside the trunk. Make sure not to slam the hinges of the trunk while closing it.

Step 3: Work with the Chain and Put the Bike on the Floor

You should put the chain on the smallest ring to lower the chances of getting all the grease on your car’s interior. It will reduce the movement of the chain. Then, you will need to put the cycle on the floor. Here, to stabilize the bicycle in the backseat, you should make the left pedal face straight up.

Placing a piece of cloth under the pedal would be a good idea. That will significantly lower the chances of the pedal putting a stain on the seat. Put another one right under the fork dropouts. This cloth will prevent the fork dropouts from puncturing the seat.

After that, you will be all good to go. If the cycle seems to move a lot when you are driving, we recommend securing it with a bungee cable. But in most cases, the bike should stay pretty stable. And do not take any passengers in the backseat. There will not be enough legroom or room on the seat to sit properly.

That said, after reaching your destination, carefully take the bike out. Get the wheel from the trunk and install it back in place. Check the tuning of the gear, brakes, and chain before riding. The movement during the ride can ruin the tuning.

Final Words

Although it might seem impossible, if you know how to fit a bike in a Sedan, you can quickly and efficiently transport your ride. And as you can see, there is really no need for an additional mount. If you just remove the front wheel, you will be all good to fit a small to medium-sized bike inside the vehicle.